Additional Photos (Click to view Larger)
 
Play
Video
Click here to view all literature
View
Literature
Literature
Video

For Immediate Answers Contact:
David Helms
 
(800) 374-5009 ext. 303
Intl. +1 (704) 841-2001
Email Me





If not available, try his/her backup:
Carlos Rossi at ext ...317


EXF #:   SN-010583  
Brand/Model:   PARK INDUSTRIES PRO-EDGE III
Machine Type:   LINE POLISHER (SINGLE HEAD)
Year of Mfg.:   2003
Condition:   Good condition  
Elect./Voltage:   240 V, 60 Cy, 3 Ph.
Appr. Repl. Cost:    100,000
Price:   $  36,500    Act Now!
Financing:    742/Mo.
Questions?  
For Instant Communication, Click Here
Description:
Reconditioned PRO-EDGE 3 Line Polisher:

  • Low hours!
    Single Head Edge Polisher for shaping & polishing most convex and flat edge profiles in lengths from 1' to 12' and thicknesses from 3/8" to 4" (spindle adjustment required on stone over 2-1/2" thickness).
  • Dual speed spindle: (2) With 2.5 HP @ 1,710 & 3,420 RPM with pneumatic head travel and position lock (with pressure gauge and adjustment); spindle angle rotation 0° - 189° by C-arm with hydraulic rack & pinion drive.
  • Center water feed, internal air purge system, tool adapter to accept 100 mm snail lock or 5/8 - 11 threaded connections, shape tool adapter.
  • Variable speed hydraulic cross-travel at 15 - 100 FPM, Heavy Duty rack & pinion drive system with hardened steel rails with slide bearings, automatically lubricated.
  • 12' L x 4' W bed with rubber matted surface, pneumatic pop-up rollers on full table to assist in positioning, loading, and unloading (2,500 Lbs total lifting cap.
  • (5) Adjustable pneumatic holddowns with aluminum extrusion extensions, adjustable PARK bench to support long pieces.
  • Easy to use, full color high resolution touch screen displays complete information to control machine and setup edge profiles.
  • Programmable library with repeatable edge profiles allowing different machine setups to be made quickly & easily, PLC control of the transverse speed, spindle amps (load), leading & trailing pass locations, number of passes, degrees of spindle angle setting.
  • Electrical: 240 Volt, 3 Phase, 60 Cycle, 30 Amps; Air - 8 CFM & 100 PSI clean air; Water - 5 GPM with a 50 PSI line pressure.
Region: EASTERN CDN (Click for Regional Map)
Special Note: Make Offer
Comment: Perfect edge polisher for a growing company!
*Dimensions: Available From Product Manager
*Weight: Please Call
Written By: Jason Cook
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.
 
My Account
Currency Exchange