Welcome, Please log in here
CNC WORK CENTER - 22 listings Sort By:   
  
 
SN-010890  |  BAVELLONI EGAR 450-4  |  CNC WORK CENTER
Year of Mfg: 2004    Good Condition    Region: MIDWEST
Description:: BAVELLONI EGAR 450-A 4-Axis CNC Work Center; Multi-functional Work Center for processing any
$ 28,500
Comment: This EGAR 450 comes with 30 SUCTION CUPS and has on...
 
SN-011336  |  BAVELLONI EGAR 250-4  |  CNC WORK CENTER
Year of Mfg: 2000    Fair Condition    Region: SOUTHEAST
Description:: BAVELLONI EGAR 250 CNC Machine: 3-Axis CNC Work Center, table size of 98" x 60", 13 HP spindle with 9,000 RPM vari...
$ 11,300
Comment: New: Spindle & Controllers!
 
SN-280032  |  BAVELLONI EGAR 315-4  |  CNC WORK CENTER
Year of Mfg: 2002    Very good condition    Region: WEST COAST
Description:: BAVELLONI EGAR 315 CNC Work Center with (4) Axis and ATC; ; GLASTON Techs recently gave this EGAR a tune up so you ...
$ 38,500
Comment: Up and running and ready to be inspected!
 
SN-011349  |  BRETON NC250  |  CNC WORK CENTER
Year of Mfg: 2001    Fair Condition    Region: SOUTHEAST
Description:: BRETON CONTOUR NC250 3-AXIS CNC Machining Center: BRETON CNC Specs: ; 14.3 HP spindle
$ 26,500
Comment: Less than 3,000 hours.
 
SN-010908  |  CMS CONCEPT 1700  |  CNC WORK CENTER
Year of Mfg: 2005    Good Condition    Region: SOUTHWEST
Description:: CMS CONCEPT 1700 CNC Machining Center: Bed size 141" (3,585 mm) x 67" (1,700 mm); DURALUMIN
$ 42,500
Comment: The very hard to find CONCEPT 1700 CNC was and "sti...
 
SN-011265  |  CMS MAXIMA  |  CNC WORK CENTER
Year of Mfg: 2006    Rebuilt w/Warranty    Region: SOUTHWEST
Description:: CMS MAXIMA / BREMBANA CNC Machining Center: ONLY 3,000 Hours  Bed size 141
$ 89,900
Comment: Very low hours!
 
SN-011360  |  CMS CONCEPT 2.10  |  CNC WORK CENTER
Year of Mfg: 2010    Good Condition    Region: MID ATLANTIC
Description:: 2010 CMS CONCEPT 2.10 CNC Machine: Monobloc 141" x 89" table size, X-Axis 147", Y-Axis 86", Z-Axis 12". 3-Axi
$ 54,500
Comment:
 
SN-011246  |  INTERMAC COMPACT EDGE  |  CNC WORK CENTER
Year of Mfg: 1999    Fair Condition    Region: SOUTHEAST
Description:: INTERMAC COMPACT EDGE CNC Machine: The COMPACT-EDGE is a numerically controlled machine capa
$ 14,500
Comment: Needs to move out to make room A.S.A.P.
 
SN-011291  |  INTERMAC MASTER STONE 2300  |  CNC WORK CENTER
Year of Mfg: 1998    As Is Condition    Region: MID ATLANTIC
Description:: INTERMAC MASTER 2300 CNC Machine: Useable bed size of 120" x 90", 10 HP direct drive electro-spindle, Variable spe...
$ 7,800
Comment: Need a low cost CNC?
 
SN-011401  |  INTERMAC MASTER 23  |  CNC WORK CENTER
Year of Mfg: 2010    Good Condition    Region: MIDDLE EAST
Description:: INTERMAC MASTER 23 CNC Machine: Useable bed size of 96" x 48", 10 HP direct drive electro-spindle, variable speed ...
Please call
Comment: Comes with tooling too!
  
 
View All